3D MODEL DESCRIPTION
This will definitely brighten up your day: our koi wall lamp is a delicate simple print that will take your ambience to another level. Follow our assembly instructions and keep these fish away from water.
What you’ll need for the assembly of your Koi Wall Lamp:
- Pliers
- Solder
- Soldering Iron
- A 23A Battery
- Neodymium Magnetic 5x2mm
You can find step by step HERE
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 14 Hours 10 Minutes
- Approximately Length: 24 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!