3D MODEL DESCRIPTION
A modular wreath with a knit texture and snap-in slots for interchangeable Christmas charms. It brings that cozy handmade feel without any actual yarn required.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 12 Hours 33 Minutes* - 220 g of filament (may vary according to your printer model)
- Multicolor - 01 Day, 03 Hours 02 Minutes* - 410 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 08 colors)
- Approximately Height: 21 x 3 x 20 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 50 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes (mouse ear brim).
- Others: -Mouse ear brim; -Top layer: concentric; -For stronger joints, increase the number of walls and infill.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
