3D MODEL DESCRIPTION
This amazing headphone holder is going to make your jaw drop. It is separated in three parts to avoid supports and make the printing process as easy as possible. Don't worry, she is not going to hurt you. See? No fangs.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 2 Days 8 Hours 25 Minutes
- Approximately Height: 33 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!