3D MODEL DESCRIPTION
Starts the match the right way. One quick move and your drink is open.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hours 26 Minutes* (may vary according to your printer model)
Multicolor - 08 Hours 48 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 4 cm (assembled)
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: requires super glue.
You Will Need: Round Bottle Opener (Ø40mm maximum) Amazon - Aliexpress - Mercado Livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
Note: The hole for the screw is 2 mm in diameter. It is recommended to use a 2.5 mm or 3 mm screw for proper fit.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!