3D MODEL DESCRIPTION
A photo frame that pulls double duty as a small organizer for the things that matter. Keys, rings, and everyday keepsakes all have a place without needing a dedicated drawer.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Front’s Monocolor - 02 Hours 42 Minutes* (may vary according to your printer model)
Back and Foot Mocolor - 02 Hours 24 Minutes* (may vary according to your printer model) - Approximately Height: 3 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Assembling the model requires glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
- Pause: To print the letters in a different color, add a pause at layer 151 during slicing and swap the print filament for your desired color.
- Filament Swap: If your printer is equipped with an AMS for automatic color switching, add a filament swap at layer 151 during slicing to print the model with the letters in a different color.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!