3D MODEL DESCRIPTION
There were no printing supports in the Han Dynasty, so we made sure this bust was completely support free. With three different versions, this stunning model is super easy to print and will look the absolute best if you print it with a lower layer height.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 11 Hours 09 Minutes
- Approximately Height: 15 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!