3D MODEL DESCRIPTION
A jet fighter that holds two pens and keeps a sticky note pad ready for action. It sits on your desk like it owns the place.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 06 Hours 36 Minutes* (may vary according to your printer model)
Multiparts - 07 Hours 57 Minutes* (may vary according to your printer model)
Multicolor - 02 Day, 02 Hours 25 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 20 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Files requires super glue.
Will you need;
Post-It 3'': Amazon - Aliexpress - Mercado livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, only in “Fuselage” file.
- Build Plate Adhesion: Yes, only in small adhesion parts.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
