3D MODEL DESCRIPTION
This awesome key holder mechanism has shown up here before, but this time it has the full force of the jaguar power. And the multicolor option, of course. You’re not gonna miss that, are you?
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 02 Hours 52 Minutes
- Approximately Height : 21 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!