3D MODEL DESCRIPTION
Spin the crank and feel like the house always wins. A capsule dispenser with casino energy that makes every pull feel like a jackpot.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 02 Days, 04 Hours, 09 Minutes* (may vary according to your printer model)
Multiparts - 02 Days, 05 Hours, 10 Minutes* (may vary according to your printer model)
Multicolor - 03 Days, 09 Hours, 57 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 40 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
You Will Need: 6x Neodymium Magnet - 8x3 - Amazon - AliExpress - Mercado Livre
4x Sound Dampening - 8x3 - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Brim) type only for files that have low adhesion to the print bed.
- Others: You can use an optimized personal profile; in the “Barrel” file, check the speed set for small areas to achieve a better finish.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!