3D MODEL DESCRIPTION
A pumpkin hiding inside a pumpkin. This articulated little character is the ultimate Halloween twist, the one no one expects to find when they open the box.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 22 Minutes* (may vary according to your printer model)
Multicolor - 04 Hours 32 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 5 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests. Considering only one of the two available versions (keychain and figurine)
Will you need;
Split Key Ring with Chain - Amazon - Aliexpress - Mercado Livre
Ring Conector 12 mm - Amazon - Aliexpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
Pumpkin Mystery Box
3D MODEL DESCRIPTION
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 02 Hours 44 Minutes* (may vary according to your printer model)
Multicolor - 11 Hours 14 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 5.5 cm
ATTENTTION: Use the print settings described below. Also, reduce the print speed by 50% by selecting the corresponding option directly on your equipment's control interface. Follow this recommendation to ensure a successful print.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 50mm/s Initial Layer / 50mm/s Initial Layer Infill | 60 mm/s Outer Wall | 150mm/s Inner Wall | 200 mm/s Sparse Infill | 200 mm/s Internal Solid Infill | 150 mm/s Top Surface
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!