3D MODEL DESCRIPTION
A distorted face turned upside down, unsettling and wrong in every possible way.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Large - 08 Hours, 17 Minutes* (may vary according to you printer model)
Monocolor Medium - 07 Hours, 31 Minutes* (may vary according to you printer model)
Monocolor Small - 06 Hours, 17 Minutes* (may vary according to you printer model)
Multipart Large - 08 Hours, 05 Minutes* (may vary according to you printer model)
Multipart Medium - 07 Hours, 23 Minutes* (may vary according to you printer model)
Multipart Small - 06 Hours, 03 Minutes* (may vary according to you printer model)
Multicolor Large - 01 Day, 08 Hours, 32 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Multicolor Medium - 01 Days, 06 Hours, 24 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Multicolor Small - 01 Day, 03 Hours, 21 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 25 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue. You will need a rope, ribbon, or elastic band of your choice to secure it to your head. More information in the "How to" videos.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Others: We use (Archimedean Chords) for finishing the top layers. In “Views” files you will have to remove the top and bottom layers, change the infill to (Honeycomb Type), and apply 50% density.
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 03% (Grid).
- Needs Support: Yes, (Tree Type).
- Build Plate Adhesion: Yes. (Brim Type) except in “Views” files.
- Others: For this model, we suggest you use a lighter slicing profile to prevent the “Mask” from becoming too heavy.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!