3D MODEL DESCRIPTION
Inspired by classic instant photos, this frame keeps your snapshot looking crisp, simple, and effortlessly nostalgic.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Instax Mini - Monocolor - 33 Minutes* (may vary according to your printer model)
Polaroid 600 - Monocolor - 46 Minutes* (may vary according to your printer model) - Approximately Frame Dimensions: Instax Mini - 10,4 x 7 cm
Polaroid 600 - 12,5 x 10 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
You Will Need: 5 mm x 3mm Neodymium Magnets - Mercado Livre | Aliexpress | Amazon
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Grid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
