3D MODEL DESCRIPTION
Nothing better to ease the hot weather than a cold beverage. Or maybe an ice cream! Luckily, you can have both with our new can holder. Don’t worry, we have two size options to fit every type of can. They’re also multicolored, so you can make it look like your favorite ice cream flavor!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 355 ml - 18 Hours 28 Minutes
473 ml - 22 Hours 02 Minutes - Approximately height: 355 ml - 16 cm
473 ml - 19,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!