3D MODEL DESCRIPTION
Every fang tells a story. This assembled trophy necklace carries skulls, teeth, and spikes like receipts from the hunt.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor - 02 Hours, 52 Minutes* (may vary according to your printer model)
Multiparts - 02 Hours, 20 Minutes* (may vary according to your printer model)
Multicolor - 16 Hours, 14 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 05 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue. To assemble this file, we used a cord measuring 04 x 04 mm. You can use this information to purchase a cord of your choice.
You Will Need: 2x Neodymium Magnets - 5mm x 3mm - Mercado Livre - Aliexpress - Amazon
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Brim Type) only “Bone Knot” file.
- Others: You will be able to use a more optimized profile.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!