3D MODEL DESCRIPTION
A wall-mounted house number display with a hidden compartment behind the planter box. Visitors see the address, not the key.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Multipart - 13 Hours 35 Minutes* - 259 g of filament (may vary according to your printer model)
- Approximately Height: 25 x 05 x 05 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 20 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 15% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes (mouse ear brim).
- Others: Use (Manual Brim) only on plate 1 of 2.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
