3D MODEL DESCRIPTION
Hjalmar was always a fan of the ale. Nothing wrong with that, right? Thing is, sometimes he would get so tipsy, he could swear his beard would change shape if heated in hot water! In no way that was possible, right? …. Or was it? Why don’t you find out?
All three of Hornhelm brothers have interchangeable items on their hands, so you can swap them off and make them feel very confused! Not only that, but their beards and hair can be shaped when wet in warm water. Try it out!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 22 Hours 57 Minutes
- Approximately Dimensions: 11cm X 09cm X 10 cm
- Remember to activate Print/ Detect Thin Walls option on your slicer of choice.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.4 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!