3D MODEL DESCRIPTION
Harald would always look up to his big brother Hjalmar and take good care of his little brother Haldor. Being the middle child is not always easy and when things got a bit frustrated, he’d eat his worries away. He’d get so stuffed he never even noticed when his chicken drumstick disappeared and his brother’s shield showed up in its place. You wouldn’t know anything about that, would you?
All three of Hornhelm brothers have interchangeable items on their hands, so you can swap them off and make them feel very confused! Not only that, but their beards and hair can be shaped when wet in warm water. Try it out!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 30 Minutes
- Approximately Dimensions: 11 cm X 10 cm X 10 cm
- Remember to activate Print/ Detect Thin Walls option on your slicer of choice.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.4 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!