3D MODEL DESCRIPTION
Haldor was born to be a warrior. Since he was a child, Haldor dreamt about Valhalla and how he wanted to take his glorious leave of Midgard by a valkyrie when it was his time to go. All these years spent in heavy practice with the sword and shield so that he’d take as much as possible of the enemies with him when the time came, and yet, more often than not, it seems his sword just disappears off his hand. Sometimes, he even finds himself going to the field with his brother’s ale in hand! That couldn’t be possible, or could it?
All three of Hornhelm brothers have interchangeable items on their hands, so you can swap them off and make them feel very confused! Not only that, but their beards and hair can be shaped when wet in warm water. Try it out!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 21 Hours 08 Minutes
- Approximately Dimensions: 08 cm x 12 cm x 11cm
- Remember to activate Print/ Detect Thin Walls option on your slicer of choice.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.4 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!