3D MODEL DESCRIPTION
Printable capsules designed to hold the mini figures and double as Christmas tree ornaments. They store the surprise and become the decoration.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Capsule 1 - 03 Hours 16 Minutes* (may vary according to your printer model)
Capsule 2 - 02 Hours 40 Minutes* (may vary according to your printer model)
Capsule 3 - 03 Hours 06 Minutes* (may vary according to your printer model) - Filament consumption: Capsule 1 - 63.15 grams (may vary according to your printer model)
Capsule 2 - 55.32 grams (may vary according to your printer model)
Capsule 3 - 59.56 grams (may vary according to your printer model) - Approximately Height: 3 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests. Filament consumption is an estimate and may vary depending on your settings.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. Tree Hybrid.
- Build Plate Adhesion: No.
- Top surface pattern: Concentric.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!