3D MODEL DESCRIPTION
Classic car headlights, mounted on your wall, 88 mph not required. Perfect for gearheads who know that the right lights can take you… anywhere.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 01 Day, 06 Hours, 53 Minutes (will vary accord to you printer model)
Approximate Measurements: 10 x 20 x 05 cm
- What will you need?
In order to assembly this print you will need the materials below:
LED lights colors
On-Off Switch
Electric Wire
Battery 12v
Battery Holder
Electrical Tape
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes. (Grid) if your printer is not well adjusted to make “bridges” and “overhangs”.
- Build Plate Adhesion: Yes. (Brim) only in “Airfoil” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
