HexaCat

3D MODEL DESCRIPTION

 

A low-poly feline with glowing lines that stalks the night in sharp, geometric style.
 

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor Large - 12 Hours, 36 Minutes*  (may vary according to you printer model)
                                Monocolor Medium - 11 Hours, 37 Minutes*  (may vary according to you printer model)
                                Monocolor Small -  10 Hours, 28 Minutes*  (may vary according to you printer model)
                                Multipart Large - 12 Hours, 25 Minutes*  (may vary according to you printer model)
                                Multipart Medium - 11 Hours, 30 Minutes*  (may vary according to you printer model)
                                Multipart Small - 10 Hours, 23 Minutes*  (may vary according to you printer model)
                                Multicolor Large - 17 Hours, 36 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
                                Multicolor Medium - 16 Hours, 33 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
                                Multicolor Small - 14 Hours, 56 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
• Approximately Height: 22 cm (assembled files)

*Note: Printing time based on a Bambu P1S printer, according to our tests.

ATTENTION: This files requires super glue. You will need a rope, ribbon, or elastic band of your choice to secure it to your head. More information in the "How to" videos.  

You Will Need: Glow Sticks - Amazon - AliExpress - Mercado Livre     

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.20 mm
• Recommended Layer Height:  0.20 mm
• Others: We use (Archimedean Chords) for finishing the top layers.
• Recommended Perimeters/ Walls: 2.
• Recommended Infill (%): 03% (Grid).
• Needs Support: Yes, (Snug Type).
• Build Plate Adhesion: Yes. (Brim Type).
• Others: For this model, we suggest you use a lighter slicing profile to prevent the “Mask” from becoming too heavy.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
 

Happy Printing!