3D MODEL DESCRIPTION
A stable desktop base designed to keep your headset secure and ready.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Hour, 33 Minutes* (may vary according to your printer model)
Multiparts - 02 Hours, 13 Minutes* (may vary according to your printer model) - Approximately Height: 06 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
You can insert a piece of filament into the indicated areas to achieve the same finish we used. It is important to insert the filament, cut it, and glue it in place.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
