3D MODEL DESCRIPTION
If you’re taking the highway to hell, this might be your ride.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 06 Hours, 58 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 08 Hours, 23 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 11 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: Set your "Profile" on your slicer to reduce speed on "Small Perimeters" for best results. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!