One less bloodsucker roaming the night, and a sharp addition to your collection.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor - 16 Hours, 50 Minutes* (may vary according to you printer model)
Multipart - 16 Hours, 38 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 20 Hours, 44 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 07 colors) - Approximately Measurements: 18 x 23 x 10 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Others: We use (Archimedean Chords) for finishing the top layers. If you prefer, use (Adaptive Layers) to improve the top of layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid).
- Needs Support: No.
- Build Plate Adhesion: Yes. (Painted Brim) only in the smallest parts with low bed adhesion.
- Others: For “Shield” files use (Ironing Type). For small part use a 0.08 mm profile for better finishing.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!