3D MODEL DESCRIPTION
A Halloween train with pumpkin wagons and a skeleton conductor, with an option to fit a LED candle inside each car for a warm glow effect. It works as a shelf piece or a centerpiece.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 16 Hours, 46 Minutes* (may vary according to your printer model)
Multiparts - 17 Hours, 19 Minutes* (may vary according to your printer model)
Multicolor - 01 Day, 12 Hours, 31 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 37 x 12 x 07 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
You Will Need: 2x - Candle Led - Amazon - AliExpress - Mercado Livre
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Inner Brim) only in “Lens” and (Painted Brim) and only for parts that are prone to warping and poor adhesion to the print bed.
- Others: Use (Concentric) at the top of the layer to achieve a better finish. In the “Lens” file. Use only 1 wall and no infill of any kind.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!