3D MODEL DESCRIPTION
Every port town has one building where trouble finds people before people find trouble. This two-story structure fits right into any waterfront campaign setting.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 19 Hours, 47 Minutes* (may vary according to your printer model)
Multiparts - 21 Hours, 06 Minutes* (may vary according to your printer model)
Multicolor - 02 Days, 04 Hours, 46 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 25 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This model has a built-in magnet slot, A drop of “Super Glue” might be necessary.
You Will Need: 08x Neodymium Magnet - 5x2 - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Painted Brim).
- Others: For a better finish, use a more precise profile optimized for the smaller perimeters of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!