3D MODEL DESCRIPTION
Crafted for indirect lighting, Halo casts a tranquil glow that reflects off nearby surfaces, transforming walls into soft gradients of light.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 09 Hours 14 Minutes* (may vary according to you printer model)
- Approximately Height: 25 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light or simply insulate
them with electrical tape.
You can choose your preferred light source from the options of Bamubu LED Lamp or LED bulb.
Important: Always use LED light sources to avoid damaging your light fixture.
Links: Bambu LED Kit: Bambu Store Amazon Aliexpress
E27 Socket: Mercado Livre Amazon Aliexpress
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay
attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
