3D MODEL DESCRIPTION
A silent guardian at your door, shushing visitors with a carved warning.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 08 Hours 51 Minutes*
Multipart - 09 Hours, 06 Minutes* (may vary according to you printer model)
Multicolor - 20 Hours, 55 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 26,5 cm (Assembled)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
You Will Need
LED Candle (maximum diameter 37mm): Amazon AliExpress Mercado Livre
*Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and assembly instructions to ensure correct fitting.
*ATTENTION: To fit the candle in the indicated location, remove the top part of the candle. Fit only the base, with the LEDs, behind the eyes of the Hallowed Hush - Door Knocker.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!