3D MODEL DESCRIPTION
A star tree topper with clean geometric lines. Designed to sit on top of the tree without clips, brackets or fuss.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Small - 03 Hours 05 Minutes* (may vary according to your printer model)
Monocolor Large - 04 Hours 17 Minutes* (may vary according to your printer model)
Multiparts Small - 04 Hours 14 Minutes* (may vary according to your printer model)
Multiparts Large - 06 Hours 11 Minutes* (may vary according to your printer model) - Approximately Height: Small 20 cm (Assembled Files)
Large 24 cm (Assembled Files)
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. Manual normal support.
- Build Plate Adhesion: Yes. Ear brim.
- Others: Reduce print speed for tall parts.
- Top surface pattern: Concentric.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
