3D MODEL DESCRIPTION
Can’t decide whether to put the star on the top of your tree? Now it’s just everywhere, shining bright!
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 05 Hours 27 Minutes* (may vary according to you printer model)
- Approximately Height: 19 cm
Led Candle - Amazon Mercado Livre Aliexpress
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
*Note: Printing time based on a Bambu P1s printer, according to our tests
*Note: Use VASE MODE for Light Diffuser and set 0 for Bottom Layers.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!