3D MODEL DESCRIPTION
Always watching, always glowing. This little guardian keeps bedtime peaceful with a soft, comforting light that feels like a hug.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 15 Hours 10 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Height: 27 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue. You can weld the internal cables of the light or simply insulate them with electrical tape. More information in the "How to" video.
You Will Need: Socket/Conector T10 - Amazon - AliExpress - Mercado Livre
LED Lamp T10 - Amazon - AliExpress - Mercado Livre
Electrical Plug - Amazon
Power Supply - Amazon
On/Off Button - Amazon - AliExpress - Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid) only “Angel Body” files
- Needs Support: No.
- Build Plate Adhesion: Yes. (Painted Brim) only in the smallest parts with low bed adhesion.
- Others:You will have to use 2% (Concentric Infill) only base for better effect.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
