3D MODEL DESCRIPTION
A two-part build with a clean look that invites two-color prints. It works great and looks even better when you play with filament contrast.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 01 Day 12 Hours 51 Minutes* (may vary according to your printer model)
- Approximately Height (assembled): 33 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Requires super glue.
Will you need;
Plastic Capsule Toy 2'' - Amazon - Aliexpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, in parts with low build plate adhesion.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!