3D MODEL DESCRIPTION
Hatched with zero thoughts and even fewer plans.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 46 Minutes* (may vary according to you printer model)
Multicolor - 06 Hours 41 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 3,5 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Attention: Some printers may create thicker layer lines (usually in the first layers). This is a condition of the 3D printing process and can cause parts to stick together and jam the mechanism. To prevent this from happening, make sure your printer is calibrated and the slicer settings are appropriate for your filament.
You Will Need:
Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre
Ring Conector 12 mm - AliExpress - Amazon - Mercado Livre
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others: We recommend a concentric pattern in the top surface to better finish.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
