3D MODEL DESCRIPTION
Shiny, fancy, and full of promise. This egg feels like something special before you even open it. Ideal for premium treats or extra special surprises.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 05 Hours 34 Minutes* (may vary according to your printer model)
Multiparts - 05 Hours 23 Minutes* (may vary according to your printer model)
Multicolor - 06 Hours 51 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 20 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid), 3% (Grid) only in the “Golden Treat_Wrapped2_Multipart”
- Needs Support: No.
- Build Plate Adhesion: Yes, Inner Brim (width 5mm) in the “top part”, “Wrapped1_Multipart” and Outer Brim (width 8mm) in the “Wrapped2_Multipart”.
- Others: You can set layer high 0,12mm in the "ribbon" to improve finish quality.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
