3D MODEL DESCRIPTION
A garden gnome figure with a hidden key compartment under the hat. It fits right in with outdoor decor and no one suspects a thing.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 07 Hours 47 Minutes* - 142 g of filament (may vary according to your printer model)
- Multicolor - 02 Days, 22 Hours 24 Minutes* - 960 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 06 colors)
- Multipart - 12 Hours 09 Minutes* - 187 g of filament (may vary according to your printer model)
- Approximately Height: 16 x 08 x 06 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
ATTENTION: These files require super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 20 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (normal (manual)).
- Build Plate Adhesion: Yes (mouse ear brim).
- Others: Use (Manual Brim) and (Snug Support) only on the "Stalk" and "Gnome Flower Body" files of each type.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!