3D MODEL DESCRIPTION
A gourd that oozes light from within, spilling a gooey, ghostly glow.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : 08 Hours, 48 Minutes* (may vary according to you printer model)
- Approximately Height: 17,5 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue. You will need a cable with a plug that is compatible with your region. You can weld the internal cables of the light or simply insulate them with electrical tape.
You Will Need: Socket/Conector G9 - Amazon - AliExpress - Mercado Livre
LED Lamp G9 - Amazon - AliExpress - Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3 (Body and Stem ) and 1 ( “Inner Light” ).
- Recommended Infill (%): 10% (Gyroid) and you will have to use 0% only in “Inner Light” file for better effect.
- Needs Support: No.
- Build Plate Adhesion: No.
- Others: Disable Ensure Vertical Shell Thickness for the “Inner Light” part.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!