3D MODEL DESCRIPTION
A corrupted crown with attitude. Cute, chaotic, and totally unstable. Kinda like your cat.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : LARGE
Monocolor - 07 Hours 26 Minutes* (may vary according to you printer model)
Multiparts - 07 Hours 21 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 18 Hours 06 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - MEDIUM
Monocolor - 06 Hours 48 Minutes* (may vary according to you printer model)
Multiparts - 08 Hours 07 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 15 Hours 36 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - SMALL
Monocolor - 06 Hours 14 Minutes* (may vary according to you printer model)
Multiparts - 08 Hours 55 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 13 Hours 21 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 30 cm
ATTENTION: “Multipart” files requires super glue.
Note: Due to the limited number of tables allowed by BambuStudio and the specific sizing requirements for the helmet/tiara, this item does not include the file or the button to open it directly in the BambuLab application.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
