3D MODEL DESCRIPTION
She doesn’t just shine, she sparkles. With light that dances like wings, she turns bedtime into a quiet kind of magic.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 17 Hours, 29 Minutes* (may vary according to you printer model)
Multipart - 17 Hours, 18 Minutes* (may vary according to you printer model)
Multicolor - 02 Days, 20 Hours, 21 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 08 colors) - Approximately Height: 22 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue. You can weld the internal cables of the light or simply insulate them with electrical tape. More information in the "How to" video.
You Will Need: Socket/Conector T10 - Amazon - AliExpress - Mercado Livre
LED Lamp T10 - Amazon - AliExpress - Mercado Livre
Electrical Plug - Amazon
Power Supply - Amazon
On/Off Button - Amazon - AliExpress - Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid) and you will have to use 2% (Concentric Infill) only in “Bases” files for better effect.
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim) only in the smallest parts with low bed adhesion.
- Others: For small “Multipart” use a 0.08 mm profile for better finishing.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
