3D MODEL DESCRIPTION
A table lamp built to look exactly like a pencil sharpener, scaled up to make a real statement. It is the kind of object that makes guests ask questions.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 08 Hours 07 Minutes* (may vary according to your printer model)
Multiparts - 08 Hours 37 Minutes* (may vary according to your printer model)
Multicolor - 01 Day, 06 Hours 54 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 16 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Files requires super glue.
In this file, you can choose between the G9 bulb and the BambuLab-style Lamp.
If you choose for G9 lamp, need to print the support. File incluided
G9 Lamp: Amazon - Aliexpress - Mercado Livre (Always use LED type lamp)
G9 socket: Amazon - Aliexpress - Mercado Livre
Bambu LED Kit: Amazon - Aliexpress - BambuLab Store
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, only in “Blade” multipart file.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
