3D MODEL DESCRIPTION
Ghosts wrapping themselves around a pumpkin, glowing softly when lit. It is the kind of lamp that looks friendly enough during the day and properly creepy at night.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 11 Hours 08 Minutes* (may vary according to your printer model)
Multiparts - 10 Hours 46 Minutes* (may vary according to your printer model)
Multicolor - 02 Day, 02 Hours 31 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
YOU WILL NEED:
Bambu LED Kit - Amazon - Aliexpress - Bambu
Candle LED - Amazon - Aliexpress - Mercado Livre
Led G9 - Amazon - Aliexpress - Mercado Livre
Socket G9 - Amazon - Aliexpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 4.
- Recommended Infill (%): 1% (Concentric)
- Needs Support: Yes. Manual Normal Snug.
- Build Plate Adhesion: Yes, Brim ears.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!