3D MODEL DESCRIPTION
A ghost hanging from a spooky tree branch wall mount, sitting on a swing with pink shoes and a coffee cup. Unsettling and adorable in equal parts.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 02 Hours, 22 Minutes* (may vary according to your printer model)
Multiparts - 02 Hours, 25 Minutes* (may vary according to your printer model)
Multicolor - 05 Hours, 32 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 11x 11 x 07 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Painted Brim) only on parts that don't adhere well to the print bed.
- Others: Use (Concentric) at the top of the layer to achieve a better finish.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!