3D MODEL DESCRIPTION
Don’t grind your gears! This geared box might be a test to your printing skills, but as intriguing as it might look, it’s all worth it in the end. It’s not only a super satisfying fidget, but it also keeps your stuff safe and sound. Think outside the box for a moment and embrace this challenge!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 01 Hour 07 Minutes
- Approximately Height: 10,5 cm
- For better functionality of the product, the use of anti-seize lubricant is recommended.
- Remember to cut between doors.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Top/Bottom Layers: 8
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!