3D MODEL DESCRIPTION
For the gadget-lovers. Built to handle screens, stands, and serious tech.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 04 Day 11 Hours 18 Minutes* (may vary according to you printer model)
- Approximately measure: 116cm X 16cm X 23 (assembled)
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Attention: This piece has details with tight tolerances (where the filament fits), pay attention to the “seams” and position it so that it doesn't interfere with the fittings. For more information, check out the slicing video.
Warning: For the monitor stand module, we recommend a maximum weight of 5 kg (11 pounds). If your device exceeds this limit, use an extra “Monitor Stand”.
You will need:
Silicone bumpers anti-slip (8mm x 2,5mm): Amazon Aliexpress Mercado Livre
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid). For "Monitor Base Connector" file use infill 30% (Grid). For "Monitor Stand" and “Monitor Base" use infill 15% (Grid).
- Needs Support: No.
- Build Plate Adhesion: Yes (Brim), only in “Monitor base” file.
- Enable the "Detect thin walls" option.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
