3D MODEL DESCRIPTION
Pack clay into the base, press down, and watch vegetables grow up through the soil. The sides of the box hold extra vegetable molds so kids can keep building their garden.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 02 Hours 36 Minutes* (may vary according to your printer model)
- Approximately Height: 2 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: We do not recommend using EVA Clay Type.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
