3D MODEL DESCRIPTION
This touchdown looks as game changing for the game as it is for your house. This amazing statue was carefully cut to avoid supports, and little assembly is required. Just remember to lower the layer height for even more highlighted details.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 2 Days 03 Hours 16 Minutes
- Approximately Height: 21,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!