3D MODEL DESCRIPTION
This box is all about having fun and showing off your best tricks!
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 2 Days 6 Hours 21 Minutes (will vary accord to you printer model)
- Approximately Length: 35 cm
**SUGGESTION LINKS**
The links below are suggestions for rubber anti-slip pads compatible with the product. Dimensions range between 20mm and 25mm (approximately 13/16"–1") in height and width, and between 3.5mm and 4.5mm (approximately 1/8"–3/16") in thickness. You can use round or square pads, but pay attention to the dimension range.
LeroyMerlin (square 25mm) Aliexpress (square or round 22mm) Lowes (round 1”) Amazon (round 1”)
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!