3D MODEL DESCRIPTION
Our cute little pug is ready to meet you – it even came straight from the groomer. Don’t worry, the bowtie needs no supports! Choose the colors that suit him best with the multicolor option, and be ready to display the nicest 3d buddy.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 9 Hours and 42 Minutes
- Approximately Length : 11cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!