3D MODEL DESCRIPTION
Wings of iron, built to move. The mechanical echo of fire.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 12 Hours, 50 Minutes* (may vary according to you printer model)
Multicolor - 02 Days, 09 Hours, 54 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 17 cm (assembled files)
- You Will Need: Gear Motor - 3V - AliExpress - Amazon - Mercado Livre
Gear Motor - 3V 50 rmp - AliExpress - Amazon - Mercado Livre
Battery Case - AAA - AliExpress - Amazon - Mercado Livre
String - 1 mm - AliExpress - Amazon - Mercado Livre
On/Off Switch - Amazon - Mercado Livre
*Note: Printing time based on a Bambu P1S printer, according to our tests.
**Note: For movement you will need 2x AAA batteries.
ATTENTION: If your 3D Printer and your Slice Profile has the "Bridge" settings properly calibrated, you can disregard the "Supports" mode. More information in the "How to Slice" video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes, (Tree) only battery storage and on/off storage area.
- Build Plate Adhesion: Yes, (Painted Brim) only “Tail Ending” and “Nails” areas.
- Others: We use (Archimedean Chords) for finishing the top layers, if you prefer.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
