3D MODEL DESCRIPTION
A shelf that unfolds however you need it. Mount it on the wall or stand it on a desk, and add or remove sections to shape the layout you want.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Kit 1 - 14 Hours 25 Minutes* (may vary according to your printer model)
Monocolor Kit 2 - 01 Day 00 Hours 27 Minutes* (may vary according to your printer model)
Monocolor Kit 3 - 01 Day 04 Hours 53 Minutes* (may vary according to your printer model)
Monocolor Kit 4 - 01 Day 04 Hours 54 Minutes* (may vary according to your printer model)
- Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: Supports about 1 kg.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim, only in the “Sheets” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!