3D MODEL DESCRIPTION
A wall-mounted mushroom planter that turns any space into a miniature forest. Perfect for succulents, air plants, or small blooms.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multipart - 14 Hours 58 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Height: 22 x 14 x 12 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
You will need: 03x Neodymium Magnets (10 x 1,5 mm round) - Mercado Livre - Amazon - Aliexpress
Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.
Note: In this model, you can choose to attach it to the wall with screws/nails or to metal surfaces using magnets.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes.* (Grid) type only in “Stem” files.
- Build Plate Adhesion: Yes. (Brim) only in “Stem” files.
- Others: *If your 3D printer or slicing profile is not calibrated for bridge mode, use support (Grid) type only in “Mushroom” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!